“Expediente Milet 1890/2022” by Jorge A. Olave Riveros
Country: Valparaíso, Chile
Parts used: Leaves
Amount: 2 tablespoons in 100 mL of water
Extracted by: Cooking
Thinner: Tap water
Application: Brushstroke
Wonga-wonga vine, gold (Pandorea pandorana) anthotype by Wendy Currie
“Golden Wonga vine” by Wendy Currie
Country: Melbourne, Australia
Parts used: Petals
Amount: Small handful
Extracted by: Mortar
Thinner: Two capfuls of vodka
Application: Brushing
Wineberry (Rubus phoenicolasius) anthotype by Devon John Chebra
“Butterfly and Man No 3” by Devon John Chebra
Country: Yardley, Pennsylvania, USA
Parts used: Berries
Amount: Handful of berries to prep emulsion and a dropper-full per sheet of 5×7 inch paper
Extracted by: Cooking – gently simmered to release pigment and again after filtering to concentrate pigment in solution
Thinner: Filtered water
Application: Brushing
Wine, red, Cabernet sauvignon (Vitis vinifera) anthotype by Syl Arena
“Cabernet Sauvignon” by Syl Arena
Country: USA
Parts used: Cheap wine, straight from the bottle
Amount: Uncertain: prepared several sheets over multiple days and discarded the last remaining bit
Application: Soaked in shallow tray of wine for several minutes, drained, dried horizontally
Walnut, black (Juglans nigra) anthotype by Francis Schanberger
“Barbie Teddy Fashion Fun” by Francis Schanberger
Country: Dayton, Ohio, USA
Parts used: Hull of the black walnut
Amount: 250 mL
Extracted by: Soaking in water with added iron, rusty nails
Thinner: Tap water
Application: Brushing
Turmeric (Curcuma longa) anthotype by Samuel Favre
“Negative love with candles” by Samuel Favre
Country: Kathmandu, Nepal
Parts used: Powder from root
Amount: 6 tablespoons (for 3 layers of 4 prints)
Extracted by: Mixing, shaking and soaking
Thinner: 200 mL alcohol (bad vodka)
Application: Brushing
Turmeric (Curcuma longa) anthotype by Michael Barath
“Geranium 3” by Michael Barath
Country: USA
Parts used: Powdered spice
Amount: 1 tablespoon
Thinner: Isopropyl alcohol 91%
Application: Brushing
Turmeric (Curcuma longa) anthotype by Lauren Miller
“The Ancients” by Lauren Miller
Country: Wichita, USA
Parts used: Powder
Amount: 1 tablespoon turmeric, 3 tablespoons iso alcohol
Thinner: 91% Isopropyl alcohol. trained through a coffee filter
Application: Brushing
Turmeric (Curcuma longa) anthotype by Kirsten Murphy
“Grandma’s House” by Kirsten Murphy
Country: Yellowknife, NT, Canada
Parts used: Powder
Amount: 1 tsp
Thinner: 4 tsp Life Brand, 99% denatured alcohol
Application: Brushing
Turmeric (Curcuma longa) anthotype by Hafsah Virk
“Summer Hope” by Hafsah Virk
Country: Lebach, Germany
Parts used: Turmeric powder
Amount: 3 tablespoons
Extracted by: Cooking
Thinner: Vodka (37.5% alcohol), spirits (99%)
Application: Brushing
Turmeric (Curcuma longa) anthotype by Carolina Carmini
“A long day” by Carolina Carmini
Country: Taboão da Serra, São Paulo, Brazil
Parts used: Powder
Amount: 15 grams
Extracted by: Dilution
Thinner: Grain alcohol
Application: Brushing
Turmeric (Curcuma longa) anthotype by Andy Schmitt
“Summer” by Andy Schmitt
Country: Plainsboro, NJ, USA
Parts used: Turmeric powder
Amount: 3 oz powder in 6 oz liquid
Extracted by: Shaking, then left to settle: gives a saturated solution
Thinner: Denatured ethyl alcohol
Application: Brushing
Turmeric (Curcuma longa) anthotype by Alfonso de Castro
“Hommage to Herschel” by Alfonso de Castro
Country: Pedrola near Zaragoza, Spain
Parts used: Powder
Amount: 1 tablespoon
Extracted by: Mortar
Thinner: Alcohol, 96 percent for medical use
Application: Brushing
Tulip tree (Liriodendron tulipifera) anthotype by Bruce Dunbar
“Robin Eggs in Nest” by Bruce Dunbar
Country: USA
Parts Used: Petals
Amount: A few petals for each print
Extracted by Mortar
Thinner: Distilled water
Application: Brushing
Tulip (Tulipa) anthotype by Vic Fischbach
“Moods” by Vic Fischbach
Country: Luxembourg, Luxembourg
Parts used: Petals
Amount: Handful for each print
Extracted by: Mortar
Thinner: Alcohol (40% neutral)
Application: Brushing
Tomato, cherry (Lycopersicon esculentum var. cerasiforme) anthotype by Łukasz Biazik
“Simple” by Łukasz Biazik
Country: Lodz, Poland
Parts used: Leaves
Amount: 60 grams
Thinner: None, pure leaf juice
Application: Hammering with a rubber mallet
Tomato (Solanum lycopersicum) anthotype by Danilo Pedruzzi
“Erodium” by Danilo Pedruzzi
Country: Bergamo, near Milano, Italy
Parts used: Leaves
Amount: A few leaves for printing
Extracted by: Mortar
Thinner: Few drops of tap water
Application: Sponge brush
Tea, assam (Camellia assamica) anthotype by Malin Fabbri
“Let’s have a cuppa” by Malin Fabbri
Country: Sweden
Parts used: Leaves
Amount: 3 teaspoons
Extracted by: Mortar
Thinner: Boiling tap water
Application: Dipping, emerging the whole substrate, leaving it to dry, then brushing on 8 coats
Tayoba (Xanthosoma sagittifolium) anthotype by Regina Cury
“Little Coriander Tree” by Regina Cury
Country: near Cantagalo, Rio de Janeiro, Brazil
Parts used: Leaves
Amount: 1 adult leaf per print
Extracted by: Food processor
Thinner: Filtered water
Application: Paintbrush
Syngonium (Syngonium podophyllum) anthotype by Janja Bijelić
“Tower” by Janja Bijelić
Country: Bosnia and Herzegovina
Parts used: Stem and leaves
Amount: 5 leaves with stems, 30mL of liquid for 6 prints (approx. 13 x 18cm)
Extracted by: Centrifuge
Thinner: Tap water / Alcohol (ethanol 70%)
Application: Brushing