“1” by Saba Fazli, Tehran, Iran
Parts used: Sumac powder
Amount: A handful for each print
Extracted by: Boiling
Solvent: Tap water
Application: Brushing
Garlic, wild (Allium ursinum) anthotype by Kazimierz Biernat
“Into the Wild” by Kazimierz Biernat, Wola Batorska, Poland
Parts used: Leaves
Amount: A handful for each print
Extracted by: Fresh leaves slightly crushed
Solvent: None
Application: The paper was rubbed directly with the leaves
Chlorella (Chlorella vulgaris) anthotype by Bárbara Almeida
“Modelo” by Bárbara Almeida, Juiz de Fora, Minas Gerais, Brazil
Parts used: Powder
Amount: 2 tablespoons
Extracted by: Soaking and decantation
Solvent: Alcohol 70%
Application: Brushing
Carrot (Daucus carota) anthotype by Bahare Naji
“Untitled” by Bahare Naji, Tehran, Iran
Parts used: Entire carrot
Amount: Four for one print
Extracted by: Grating and pressing
Solvent: None
Application: Brushing
Orange (Citrus sinensis) anthotype by Ben Conway
“Abstract #2” by Ben Conway, San Francisco Peninsula, California, USA
Parts used: Peel
Amount: Less than half of one orange’s peel
Extracted by: Soaking for six days
Solvent: Distilled white vinegar
Application: Spreading around with a pipette
Tarragon, French (Artemisia Dracunculus var. Sativa) anthotype by Ralph Rinke
“Tarragon ogram” by Ralph Rinke, Parksville, British Columbia, Canada
Parts used: Leaves
Amount: Approximately 2 grams of 2-20 cm stalks
Extracted by: Mortar
Solvent: Distilled water, 6 mL
Application: Brushing
Mix of Zucchini (Cucutia pepo) and Cilantro (Coriandrum sativum) anthotype by McKinley Milliron
“Green Dreams” by McKinley Milliron, Colorado Springs, Colorado, USA
Parts used: Peel of zuccini and leaves from cilantro
Amount: 1 cup zucchini peel, 1 cup chopped cilantro leaves
Extracted by: Blender
Solvent: Isopropyl alcohol
Application: Brushing
Wakame seaweed (Undaria pinnatifida) anthotype by Edward James Powers
“Morning Surf” by Edward James Powers, Venus, Pennsylvania, USA
Parts used: Blades
Amount: 1/4 cup dried fronds
Extracted by: Ground in a blender, then soaked for one week
Solvent: 91% isopropyl alcohol
Application: Brushing
Mix of Spirulina (Spirulina platensis) and Turmeric (Curcuma longa) anthotype by Mariam Matta
“Free Roaming Friends” by Mariam Matta, Los Angeles, California, USA
Parts used: Powders
Amount: First, equal amounts of both powders, then I added slightly more turmeric. Minimum triple liquid to powder ratio by volume for solvent
Extracted by: Soaking and swirling in a metal cocktail shaker, then draining slowly through coffee filters.
Solvent: 91% isopropyl alcohol, and a tiny bit of water for getting the stubborn bits drained
Application: Airbrushed until the paper was evenly a deep yellow
Mix of Pepper, Kashmiri and red (Capsicum annuum) and Turmeric (Curcuma longa) anthotype by Isis Gayadin
“Influence by Presence” by Isis Gayadin, Colorado Springs, Colorado, USA
Parts used: Flesh of the red pepper with no seeds, powdered turmeric, and powdered Kashmiri pepper
Amount: 6 tablespoons of blended red pepper, a teaspoon of turmeric powder, and a teaspoon of Kashmiri pepper
Extracted by: Combining the mix in a blender and then straining it through cheesecloth
Solvent: A Tablespoon of tap water
Application: Brushing with a sponge brush
Brant’s oak (Quercus brantii) anthotype by Elham Payamani
“1” by Elham Payamani, Tehran, Iran
Parts used: Acorn fruit
Amount: A handful for each print
Extracted by: Cooking and boiling
Thinner: Tap water
Application: Brushing
Sun rose (Mesembryanthemum cordifolium) anthotype by Karol Santiago
“Untitled” by Karol Santiago, Caruaru, Brazil.
Parts used: Leaves
Amount: A handful
Extracted by: Maceration
Thinner: None
Application: Brushing
Red cabbage (Brassica oleracea) anthotype by Regina Cury
“Patuá” by Regina Cury, Rio de Janeiro, Brazil
Parts used: Leaves
Amount: 50 grams
Extracted by: Blender
Thinner: Tap water
Application: Brushing
Nasturtium (Tropaeolum majus) anthotype by Meret
“Untitled” by Meret, Switzerland
Parts used: Yellow petals
Amount: A handful
Extracted by: Mortar
Thinner: A few drops of denatured alcohol
Application: Brushing with a foam brush
Mix of Pepper, orange bell (Capsicum annuum) and Turmeric (Curcuma longa) anthotype by Debbie Bentley
“Green Man, Revisited” by Debbie Bentley, Wiggins, Colorado, USA
Parts used: Flesh and skin of orange bell pepper and ground turmeric root powder
Amount: 2 average-sized peppers and 1 tablespoon of turmeric powder
Extracted by: The pepper was ground in a mortar
Thinner: 91% rubbing alcohol for both emulsions
Application: Brushing and drying between coats
Hibiscus (Hibiscus sabdariffa) anthotype by Tomás N. Castro
“Jardim da Estrela” by Tomás N. Castro, Lisboa, Portugal
Parts used: Dried petals
Amount: 20 grams of dried petals for 100 mL of alcohol
Extracted by: Soaked for two days with frequent shaking
Thinner: 96% ethyl alcohol
Application: Soaking
Caladium (Caladium bicolor) anthotype by Cristina Zaletta
“Succulents” by Cristina Zaletta, North Vancouver, British Columbia, Canada
Parts used: Leaves
Amount: 2
Extracted by: Soaking
Thinner: Isopropyl alcohol 99%
Application: Brushing
Oregon grape (Mahonia aquifolium) anthotype by Bernd Hutschenreuther
“Mahonia aquifolium” by Bernd Hutschenreuther, Dresden, Germany
Parts used: The dark blue lilac berries
Amount: 5 berries, for a print 10×15 cm
Extracted by: Mashed with a teaspoon in alcohol
Thinner: 5 mL of isopropyl for one image
Application: Brushing
Saffron (Crocus sativus) anthotype by Li Vasc
“Tell Me a Nightmare” by Li Vasc, Paraíba, Brazil
Parts used: Powder
Quantity: 2 tablespoons
Extracted by: Mixing
Thinner: Tap water, distilled water, alcohol 70%
Application: Brush
Spinach (Spinacia oleracea) anthotype by Tianshi
“Shadows of the Past” by Tianshi, Brussels, Belgium
Parts used: Leaves
Amount: A handful for each print, 200 grams
Extracted by: Mortar
Thinner: Alcohol
Application: Brushing