Historical photographic methods in use today - the art, processes and techniques of alternative photography |
|||||||||||
 |
BOOKS |  |
COMMUNITY & EVENTS | |
GALLERY | |
PROCESSES HOW-TO | |
SUPPLIERS |  |
|
Jurek is a photographer from south of Norway - near Oslo. He works with alternative photography and has worked with Polymer Gravure for the last 3 years. He has participated in a number of collective and personal exhibitions.
Jurek is also a member of the Norwegian group called Bromkameratene. They work with fine art photographic media.
Printmaking in the Sun
Dan Welden, Pauline Muir, Melvyn Petterson, Dan Weldon
Covering the solarprint, or the photopolymer process.
Highly recommended
Be first to see new artists work and read articles. You won't be spammed - it's a monthly, or bi-montly newsletter - and your email will not be passed on to anyone else.
Quick news in one line. Follow our tweets.
Follow our Facebook page to get our news, as they happen. Become a fan of our Facebook page.
Join our Facebook group and share your news, list workshops & exhibitions and invite others. Join our group.
Our channel shows films made by us (with help of Antony Mournian). Currently just a few, but more will follow. Subscribe to our You Tube channel.
Our blog will show some of the highlights from the newsletter, though not all. Can also be followed in your RSS feed. Follow our blog.
Find: New articles Process step-by-step Working practices
Writer / Jurek Karwowski
Photopolymers - a brief description
A Photopolymer plate is a metal plate coated with a light sensitive film and is ordinary made to use in graphic industry. This is a non-toxic process.
Always be careful when handling chemicals. Read the health and safety instructions.
In my work I used KM 73 plates from Printight. This is a metal plate coated with a light sensitive film.
Process
1Prepare positive film. Drawings, photocopies and laser or inkjet prints on transparent film may all be used. I work with Canon transparent to use with ink jet bubble printer. Canon BJC 8200 does a great job.
2Expose the plate in with this positive film in UV light for a couple of minutes. Then expose a positive stochastic raster in the plate for about half time of the positive film. Philips HPR 125 is a good start for the beginners but for the best results is to use a vacuum frame with UV light.
3Put the plate in water (20 Celsius) for 30 seconds, and then careful rub the plate with a sponge. Place the plate on a towel and examine the depth of the washout. When you can see a relief from the positive, the plate is finish. Then wash the plate in could water for about 15 sec.
4Dry the surface of the plate with a fan heater or hair dryer for 5 minutes on a warm setting.
5Before inking the plate you must harden the polymer. Put the plate back again in the UV light in about 10 minutes without the positive and raster. Now, the plate is finished and ready for inking.
6In my work I use ink made for graphic art called Charbonel NOIR RSR. This is black ink and gives very good results. Mix the ink with Easy Wipe compound and a little bit of light oil. In my work I ink the plates with a roller made for graphic art. Then wipe the plate using tarlatan. Tarlatan is an open-meshed woven material also used for bookbinding. Fold it to form a ball and used it to wipe off the plate with a quick circular movements.
7Print through an etching press on lightly dampened paper with slight pressure.
Printmaking in the Sun
by Dan Welden, Pauline Muir, Melvyn Petterson, Dan Weldon
Highly recommended
|
|
|
|
Historical photographic methods in use today - the art, processes and techniques of alternative photography
Take part
~ Write articles
~ Write in the Open blog
~ Get your
gallery here
~ Become a member
~ Join showcase
Join our community
Twitter with us
Join our Facebook group
Share pix on Flickr
~ Discuss in the Forum